Joe's skills for trade
Posted: Fri Sep 17, 2010 12:42 am
Some of my better skills that I'm willing to swap for somethin' or another...
Machining:
I have a pretty well equipped (manual) machine shop and routinely do things within a .001" down to a few "tenths".
Bridgeport Mill
Bridgeport/Romi lathe
South Bend Lathe
Reid Surface Grinder
Brown & Sharpe Universal Grinder
My prized possession - A Moore rotary table (accurate to 2 arcseconds)
And of course, saws and other miscellaneous stuff.
Welding:
Miller Dynasty 300DX TIG (GTAW) Welder
Oxy-fuel welding on steel and aluminum when the situation requires it.
I also have a MIG welder, but prefer TIG welding.
Casting:
Sand castings - up to about 20 lbs of aluminum, I can also do bronze & other materials
Investment castings - I'm just getting started, but will update as my experience advances
Machining:
I have a pretty well equipped (manual) machine shop and routinely do things within a .001" down to a few "tenths".
Bridgeport Mill
Bridgeport/Romi lathe
South Bend Lathe
Reid Surface Grinder
Brown & Sharpe Universal Grinder
My prized possession - A Moore rotary table (accurate to 2 arcseconds)
And of course, saws and other miscellaneous stuff.
Welding:
Miller Dynasty 300DX TIG (GTAW) Welder
Oxy-fuel welding on steel and aluminum when the situation requires it.
I also have a MIG welder, but prefer TIG welding.
Casting:
Sand castings - up to about 20 lbs of aluminum, I can also do bronze & other materials
Investment castings - I'm just getting started, but will update as my experience advances