Back of the envelope power output calculations

This is where any newbies should begin. See various FAQs and rules, learn to search, find out how to join the forums so you can post yourself.
Forum rules
The rules should go without saying, but here they are:
Use your real name, and if you use an avatar, make it a picture of you. This is for real people only.
Don't cuss -- I don't mind, but others may.
Don't get personal and call names.
Stay on-topic -- start a new thread for a new topic. Try to get it in the right category. If you have a question about what that might be, ask me.
Be informative and provide useful information. Please search to see if your question is already answered before asking again.
Keep speculations and general gassing to the forums/threads meant for them.
Don't ask a question, then start a fight over the answer. Google/Wiki things first if you can manage.
Don't anger me -- if you do, you're toast here.
Don't put copyrighted material up here and get me in trouble.

Back of the envelope power output calculations

Postby Doug Coulter » Fri Aug 27, 2010 12:05 am

Robert Heinlein said, in Farmer in the Sky, that if you can't work something out to close order magnitude on the back of an envelope, you shouldn't call yourself an engineer.
I agree -- but I did find that modeling my learning after his precepts made me quite overqualified when I entered that job market compared to most. Still, not exactly a bad place to be, eh?

This particular one came up with a guy I'm mentoring off the forum, but it's instructive, and no need to name names for this.
He assumed that millions of neutrons a second was real power output, and we were going to do those kinds of things right off, when in fact I know of only a few people and places
that are even getting to that (I'm one). Too bad atoms are so tiny and the exponents involved with all this are all very large or very small.

So, for fun, and this isn't precise, just close order-magnitude, let's do the numbers here (I actually did do this on an envelope w/o a calculator). The result comes out fairly even numbers, which is fun too.

Joules per ev is 1.602...e-19. Takes a lotta eV to be a joule, in other words.

Ok, a million neutrons/second implies about twice that many fusion events with D-D, with a very gross mean output of about 3.5 MeV per. Call it 7 Mev/neutron output.

So we have 7 * 1.6 e6 * e6 * e-19 worth of power in a million neutrons/second fusor. Multiplying the rest of the way through gets us 11.2 e-7 joules/second, or about 1 microwatt.

Most of the fusors that get there in the normal modes put in about 400w (using Richard Hull's data from the last HEAS, 2009, which I duplicate here as well).

No, we're not boiling that cup of tea with our outputs! The one microwatt per million is a nice easy to remember number, handy. My best ever weird pulsed mode made maybe 500x that output/input ratio, still not that useful, as so far it doesn't scale to higher output well, just lower input, but a step on the way (I'll be documenting that fully as soon as my data aq stuff is rolling well), but we dupe the results here all the time.
Posting as just me, not as the forum owner. Everything I say is "in my opinion" and YMMV -- which should go for everyone without saying.
User avatar
Doug Coulter
 
Posts: 2968
Joined: Wed Jul 14, 2010 8:05 pm
Location: Floyd county, VA, USA

Re: Back of the envelope power output calculations

Postby Steven Sesselmann » Tue Jun 12, 2012 9:33 pm

Yes, these calculations have been done plenty of times, the big issue here is the input power...,1 microwatt output is not bad if the input is zero!

What i am aiming for with F.I.C.S. fusion is to achieve zero input power, this should happen by itself at or around 10^14 fusion reactions, which according to your calculations should be about 1 watt. FICS stands for fusion induced charge separation, you can work it out yourself, for every positively charged particle that escapes to ground via a 100 KV potential you get a charge separation of 100,000 ev.

10^5 * 10^14 = !0^19 eV or 1 coulomb

Charged fusion products are kicked out of the nucleus with a lot more energy than 10^5 ev, actually they have closer to 10^6 ev., so by lowering the cathode potential, the gain increases.

The only problem is, how to switch it off?

Hopefully not a problem I will have to del with myself.

Steven
http://www.beeresearch.com.au....take a difficult problem and find a simple solution!
User avatar
Steven Sesselmann
 
Posts: 24
Joined: Wed Aug 25, 2010 9:41 pm
Location: Sydney - Australia


Return to Coulter's Smithing forums

Who is online

Users browsing this forum: No registered users and 1 guest