Making a socket for my 18-1 tube.
Posted: Thu Sep 08, 2011 5:29 pmI'll let the pictures tell this story, other than to mention that the material is acetal 32mm rod and the clip is a ΒΌ" fuse clip.
Science/Engineering/Technical forums
A place to share practical knowledge
http://www.coultersmithing.com/forums/
Making a socket for my 18-1 tube.
http://www.coultersmithing.com/forums/viewtopic.php?f=16&t=456
Page 1 of 1
Posted: Thu Sep 08, 2011 5:29 pmRe: Making a socket for my 18-1 tube.
Posted: Thu Sep 08, 2011 5:30 pmRe: Making a socket for my 18-1 tube.
Posted: Thu Sep 08, 2011 5:34 pmChris, isn't this a story about fabricating something, and therefore should go there?
Re: Making a socket for my 18-1 tube.
Posted: Thu Sep 08, 2011 5:45 pmIt's about making something that measures something! Let's move it, if better elsewhere. The more important issue than making it is whether it mitigates or adds to the noise, which I can update here on.
Re: Making a socket for my 18-1 tube.
Posted: Thu Sep 08, 2011 5:46 pmNothing is ever simple, but you didn't even mention measuring anything...